Gift Items, Tools & Stickers

Designed and manufactured to take on the toughest tasks you can throw at it, our Original Glove provides a winning combination of versatility and performance. The Clarino Synthetic Leather palm and fingertips extends the life of the glove while the Thermal Plastic Rubber hook and loop cuff closure and two-way stretch Spandex top provides a perfect fit. Endorsed and used by Team Monster Energy Pro Circuit!

Pro Circuit Folding Pit Chair with Pro Circuit Logos on Front and Back. Foam Padding on the arm rest and its perfectly sized to fit kids all the way up to the Big Guys!
Please note: All Folding Pit Chairs purchased online are subject to additional freight charges that may not be displayed upon check out. For best rates or more information call 01283 500450

Pro Circuit is pleased to introduce a new addition to their line of motorcycle accessories.
The Pro Circuit Pit Rug is designed to give your pit setup the “Factory” look while
protecting the ground and the environment at the same time. Adorned with Pro Circuit’s
legendary logos, this custom-crafted pit rug features a high-tech combination of
materials that quickly and easily absorb excess liquids. The tuft carpet provides
additional cushioning and comfort not found in the plastic mat versions, making this mat
“Mechanic Friendly”. The plush top also helps reduce the chance of nuts and bolts
bouncing away or getting lost in the dirt.

Pro Circuit Pit Rug
• FIM Approved
• Tuft: 1/8” or 1/10” cut-pile
• Size: 110 x 240 cm
• Weight: 14 lbs
• Pile Composition: 100% PA bcf or PA mono
• Backing: Black standard vinyl
• Highly absorbent (water, oils, etc.)
• Dust controlling
• Crush and slip resistant
• Fire resistant
• Easy to maintain
• Washable

New Ray Kawasaki Pro Circuit Monster Villopoto Replica Finely detailed licensed die-cast replicas.
Window style box for display.

Finely detailed licensed die-cast replica.

Window style box for display.

Dimension of the actual product: Length 21.25 inches
Width 3.25 inches
Height 5.25 inches

Fits Most Showa/KYB USD Forks
•EZ push-button operation eliminates harsh, built up air pressure instantly
•Relieving air pressure allows your suspension to operate as designed
•Compatible with Kayaba and Showa upside-down forks equipped with stock bleeder screws
•Simple installation replaces OE bleeder screws in minutes
•Two bleeder valves with adapters included in set

Fits all.
•Lets air supply into the fuel tank, but stops fuel from coming out
•Installs in place of the stock overflow hose in seconds
•CNC machined from 6061 T-6 billet aluminum
•Anodized rich Midnight Black with distinctive laser etched “WC” logo
•Durable 19mm long mounting hose included

Winner of our strangest call-in question: The guy who wanted to know what sizes our umbrellas came in. People: it's an umbrella. Pro Circuit being based in Southern California, almost every weekend they are out there somewhere else...and lots of times it rains. If they can figure out how to win that many #1 plates over the years....we can figure out how to get out of the rain. This is the umbrella they use.

The perfect size for dragging books to school, running away from home (two, maybe three nights), holding your clothes while frolicking on that nude beach...you know...the usual. It's a backpack. It's sturdy, it has all the whistles and bells, zippers and compartments. PLUS there's the Pro Circuit name and Logo screaming at you from the back, so those who have been roosted will know why: because it's a Pro Circuit backpack.

The Agent bag is approved by Oceanic Airlines (and all others) as carry-on size. Rider's agents can stuff all that cash in this bag and never be far away from it. It's also a really handy over-weekend size. You can easily jet from home to a race for a 3-dayer and fit everything you need in the Agent bag. (if not, then your wife/gf must have packed it for ya).

This is the bag that you use when you pack your riding gear for a place like the Bercy SX, or the MX o' Nations. You can jam in all your riding gear, plus some street clothes. If you wheelie it, the little plastic wheels on the back will let you rip through the international terminal without getting yourself "pastrana-ed" by tearing your rotator cuff/acl/ucl/icbm/etc... It's a big honkin' bag. Got kids? It'll easily fit the average obnoxious nine year old.

This 7-piece T-handle set includes 8mm, 10mm, 12mm, 14mm and 17mm wrenches plus a #2 and #3 Phillips head screwdrivers.

Made from lightweight aluminum and designed to hang from your toolbox for quick and easy access to your complete set of t-handle tools.

Designed to sit on the lip of your toolbox for easy access and holds all 7 of you T-handles.

Makes removing cylinder head studs a breeze! This kit includes all three wrenches (6mm, 8mm and a 10mm).

The Spoke Wrench Jaws are what grab the spokes (£10.00 each). You put the Jaws into the Handle (£13.00), which is sold separately.

Provides plenty of leverage and keeps springs from shooting all the way across the garage! Perfect addition to any toolbox.

This is the same lanyard that the race team wears...and they clear the official AMA Tech Inspection week after week! . If you put your employee hard card on your Pro Circuit Lanyard and wear it to work, it's guaranteed to give you better holeshots, more torque and higher top end revs. Worn often enough, it could improve your low speed handling and high speed stability. If nothing else, it will make you look a whole lot cooler than anybody else that's wearing a tie.

Pro Circuit key ring / tape measure.
Total length 100cm / 39 inches

The Pro Circuit Keychain/Taper measure is probably the absolutely most highly prized item in the MX/SX world. Here's why: guys buy this keychain. Then they have their hair dyed red, an ortho makes them shorter by removing spinal discs, then they top it off with plastic surgery. End result: they look just like Ryan Villopoto. After a race, they go to a bar, toss the Pro Circuit Keychain on the counter...chicks fight over who gets to be first...and well....you know the rest.

T-4R Replacement Decal Kit. 09-10 T-4R System Decal Kit (Will fit all Pro Circuit 4 inch Exhaust syatems). *comes with end cap decal

Ti-4R Replacement Decal Kit. 2009-2010 TI-4R System Decal Kit (Fits all 4 inch canister Pro Circuit exhaust systems and decals). *Comes with End Cap Decal

T-4 Silencer Replacement Decals replace old, damaged or worn stickers and Tags. Specially made for high temperatures. No hardware required, just stick and ride.

Ti-4 Silencer Replacement Decals replace old, damaged or worn stickers and Tags. Specially made for high temperatures. No hardware required, just stick and ride.

Replacement End Cap Decals (high temperature)

Factory Sound 304 Silencer Decal. (Fits all 2-Stroke Pro Circuit Silencers) - Made for Factory Sound 304 Silencers)

Original Logo Sheet has assorted sizes of the original Pro Circuit logo.

Stickers! Stickers! No toolbox, refrigerator or slow moving pedestrian is safe.

This is a GENUINE Pro Circuit Deluxe Logo Sheet 13in. x 19.50in. tall.(BEWARE OF PEOPLE SELLING COPY STICKERS)

Stickers! Stickers! No toolbox, refrigerator or slow moving pedestrian is safe.

This is a GENUINE Pro Circuit Deluxe Logo Sheet 13in. x 19.50in. tall. This is the latest design for 2010. (BEWARE OF PEOPLE SELLING COPY STICKERS)

Absolutely the best way to get a holeshot on your day. The Pro Circuit ceramic mug has a whopping 500cc capacity, which is almost exactly the same amount that your average, basic cup of coffee can hold. Available in a rainbow of colors, as long as your rainbow is only black. Each cup is tested on the dyno by our crack staff of caffeine addicts.

If you were to take our Aluminum Mug through AMA Tech, it wouldn't pass, because it holds more coffee than the average production "cup o' coffee". It also keeps coffee hotter than normal, comes complete with a logo that screams "Pro Circuit", and before you ask....NO, it's not also available in titanium. If it was, it'd cost about a hundred bucks. In carbon fiber...even more. It's aluminum. It works great. Get over it.

Pad features high-density foam and black vinyl wrap with the Pro Circuit logo in a metallic silver color. Pads available for standard handlebars, minibikes or FatBar-style handlebars.

Pad features high-density foam and black vinyl wrap with the Pro Circuit logo in a metallic silver color. Pads available for standard handlebars, minibikes or FatBar-style handlebars.

Pad features high-density foam and black vinyl wrap with the Pro Circuit logo in a metallic silver color. Pads available for standard handlebars, minibikes or FatBar-style handlebars.

Front Fender Decals From £8.50 a pair. Available in yellow, black or white. Also available in Hologram (£10.00 a pair) Most are offered in three different sizes (standard, mini and micro).

Front Fender Decals From £8.50 a pair. Available in yellow, black or white. Also available in Hologram (£10.00) Most are offered in three different sizes (standard, mini and micro).

13 inch long Arched Front Fender Decals
Pair of Decals per part number
Durable 12 mil vinyl
Colorfast Ink
High-tack adhesive
Made in the USA

Original Logo Van Decal is 36" wide and 9" tall.

Pro Circuit Original Logo Banner. The banner is a great addition to any garage or race track.

The banner is a great addition to any garage or race track. 90in. x 23in.

Pro Circuit mouse pads are guaranteed to make your computer faster. Complete with the #1, WE RACE graphics, you'll be able to roost on the internet!